Radius Authorization-Mode - Siemens SCALANCE XM-400 Configuration Manual

Security and authentication
11.2 RADIUS client
Result
The RADIUS authentication is deactivated.
Note
The login is possible only with a local user name and password. If the local logon fails, there
is no authentication via a RADIUS server.
Further notes
You enable the authentication via a RADIUS server with the
command.
11.2.2.3

radius authorization-mode

Description
With this command you specify for the login authentication how the rights are assigned to the
user with a successful authentication.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
radius authorization-mode { standard | vendor-specific }
The parameters have the following meaning:
Parameter
standard
vendor-specific
Result
The assignment of rights during the login authentication is defined.
820
Description
In this mode the user is logged in with administrator
rights if the server returns the value "Administrative
User" to the device for the attribute "Service Type". In
all other cases the user is logged in with read rights.
In this mode the assignment of rights depends on
whether and which group the server returns for the
user and whether or not there is an entry for the user
in the table "External User Accounts".
login authentication
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
Range of values / note
Default
-