Siemens SCALANCE XM-400 Configuration Manual page 708

Layer 3 functions
9.7 RIPng (IPv6)
Requirement
● The interface is an IPv6 interface.
● You are in the Interface configuration mode
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call up the command with the following parameters:
ipv6 rip metric-offset <integer (1-15)>
The parameter has the following meaning:
Parameter
integer
Result
The metric offset is configured.
708
Description
Metric offset
Range of values / note
1 ... 15
Default: 1
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11