Igmp Snooping; The "Show" Commands; Show Ip Igmp Snooping - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface (cli)

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

IGMP snooping

This section describes the snooping functionality of the Internet Group Management

This section describes commands with which you display various settings.

This command shows information about IGMP snooping for all or a selected VLAN.

You are in the User EXEC mode or in the Privileged EXEC mode or in the Global

configuration mode.

The command prompt is as follows:

Call up the command with the following parameters:

show ip igmp snooping [Vlan<vlan id]

The parameters have the following meaning:

For information on names of addresses and interfaces, refer to the section "Interface

identifiers and addresses (Page 42)".

The information about IGMP snooping is displayed.

SCALANCE XM-400/XR-500 Command Line Interface (CLI)

Configuration Manual, 06/2016, C79000-G8976-C252-11

cli(config)#

Keyword for a VLAN connection

Number of the addressed VLAN

Layer 2 management protocols

8.3 IGMP snooping

Range of values / note