Show Ipv6 Pmtu - Siemens SCALANCE XM-400 Configuration Manual

Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show ipv6 neighbors
Result
The IPv6 neighbors table is displayed.
Further notes
You configure a static entry with the
7.2.2.2

show ipv6 pmtu

Description
This command shows the settings for Path MTU.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show ipv6 pmtu
Result
The settings are displayed.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
or
cli#
or
cli#
command.
ipv6 neighbor
Network protocols
7.2 IPv6 protocol
307