No Web-Session-Timeout; Panel Button; Commands In The Global Configuration Mode - Siemens SCALANCE XM-400 Configuration Manual

Functions specific to SCALANCE

4.3 Panel button

4.2.2.2

no web-session-timeout

Description
With this command, you disable the automatic logoff.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
no web-session-timeout
Result
Automatic logoff is disabled.
Further notes
You enable automatic logoff with the
You display the current timeout setting with the
4.3 Panel button
This section describes the commands relevant for working with the Panel Button function.
4.3.1

Commands in the global configuration mode

This section describes commands that you can call up in the Global configuration mode.
In Privileged EXEC mode, enter the
Commands relating to other topics that can be called in the Global configuration mode can
be found in the relevant sections.
You exit the Global configuration mode with the
Privileged EXEC mode again.
148
command.
web-session-timeout
show web-session-timeout
command to change to this mode.
configure terminal
or
end exit
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
command.
command and are then in the