Network protocols
7.2 IPv6 protocol
7.2.2.3
show ipv6 route
Description
This command shows the routes currently being used.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show ipv6 route
Result
The IPv6 routing table is displayed.
Further notes
You configure a static entry with the
7.2.2.4
show ipv6 route summary
Description
This command shows a summary of the IPv6 routes.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameter assignment:
show ipv6 route summary
308
or
cli#
or
cli#
command.
ipv6 route
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11