Ping - Siemens SCALANCE XM-400 Configuration Manual

Configuration
3.1 System
Result
The CLI session is ended and the Windows Login prompt is displayed.
3.1.9

ping

Description
With this command, you request a response from a device in the network.
This allows you to check whether or not another node is reachable.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
ping [ip]<destination-address>
The parameters have the following meaning:
Parameter
ip
destination-address
size
byte
count
packet_count
timeout
seconds
78
or
cli#
[size<byte(0-2080)>]
[count<packet_count(1-10)>]
[timeout<seconds(1-100)>]
Description
Uses an IPv4 address
Address of the called node
Keyword for the size of the packets to
be transferred
Keyword for the size of the packets in
bytes
Keyword for the number of packets to
be requested
Number of packets
Response wait time
If this time expires, the request is re-
ported as "timed out".
Time to the timeout in seconds
Range of values / note
-
Enter a valid IPv4 address or a
valid host name.
-
0 ... 2080
Default: 32
-
1 ... 10
Default: 3
-
1 ... 100
Default: 1
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11