Ip Services - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

● Remote access
● Shows what remote access the user has.
The "Digital Input" table contains the following columns:
● Digital In
The available digital inputs.
● Rule set
Define the rule set that is controlled via the digital input.
● Dynamic Source (Range)
Enter the IP address or an IP range that is allowed to send IP packets.
● Status
Shows the remaining time for access.
4.9.5.4

IP services

On this WBM page, you define IP services. Using the IP service definitions, you can define
firewall rules for specific services. You select a name and assign the service parameters to it.
When you configure the IP rules, you simply use this name.
Description
The page contains the following:
● Service Name
Enter the name of the IP service. The name must be unique.
This table contains the following columns:
● Select
Activate the check box in the row to be deleted.
● Service Name
Shows the name of the IP service.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Configuring with Web Based Management
4.9 "Security" menu
275