Show Ip Ospf Database Network - Dell Z9500 Reference Manual

Field
External Route
Tag
Example
Dell#show ip ospf 1 database external
LS age: 612
Options: (No TOS-capability, No DC, E)
LS type: Type-5 AS External
Link State ID: 12.12.12.2
Advertising Router: 20.31.3.1
LS Seq Number: 0x80000007
Checksum: 0x4cde
Length: 36
Network Mask: /32
LS age: 1868
Options: (No TOS-capability, DC)
LS type: Type-5 AS External
Link State ID: 24.216.12.0
Advertising Router: 20.20.20.8
LS Seq Number: 0x80000005
Checksum: 0xa00e
Length: 36
Network Mask: /24
Dell#
Related show ip ospf database
Commands

show ip ospf database network

Display the network (type 2) LSA information.
Z9500
Syntax
show ip ospf process-id database network [link-state-id] [adv-
router ip-address]
Parameters
process-id
Open Shortest Path First (OSPFv2 and OSPFv3)
Description
Displays the 32-bit field attached to each external route.
The OSPF protocol does not use this field, but you can use
the field for external route management.
OSPF Router with ID (20.20.20.5) (Process ID 1)
Type-5 AS External
Metrics Type: 2
TOS: 0
Metrics: 25
Forward Address: 0.0.0.0
External Route Tag: 43
Metrics Type: 2
TOS: 0
Metrics: 1
Forward Address: 0.0.0.0
External Route Tag: 701
— displays OSPF database information.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
1269