T640 Cable Management System Description; T640 Connector Interface Panel (Cip) Description; Cip Components; Figure 7: Cable Management System - Juniper T640 Hardware Manual

Hide thumbs Also See for T640:

Table of Contents

Documentation

T640 Cable Management System Description

Documentation

T640 Hardware Component Overview on page 13

T640 Router Description on page 3

T640 Physical Specifications on page 119

The cable management system (see

semicircular plastic bobbins mounted on the front of the router below the FPC card cage.

The PIC cables pass between the bobbins and into the tray, keeping the cables organized

and securely in place. The curvature of the bobbins also helps maintain the proper bend

radius for optical PIC cables.

You can pull the cable management system up and outward to lock it into the

maintenance position. This allows you to access the lower fan tray and the front air filter.

T640 Hardware Component Overview on page 13

T640 Router Description on page 3

T640 Chassis Description on page 15

CIP Components on page 19

Management Ports on page 20

Alarm Relay Contacts on page 21

The Connector Interface Panel (CIP) consists of Ethernet, console, and auxiliary

connectors for the Routing Engines and alarm relay contacts (see

Chapter 3: Chassis Components and Descriptions

Figure 7 on page

19) consists of a row of nine

Figure 8 on page

Table of Contents