Configuring A Service Package To Be Used In Conjunction With Ptp; Checklist For Monitoring Fast Ethernet And Gigabit Ethernet Interfaces - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Related
Documentation

Configuring a Service Package to be Used in Conjunction with PTP

Related
Documentation

Checklist for Monitoring Fast Ethernet and Gigabit Ethernet Interfaces

Purpose
150
Power consumed
Class of power device
Understanding PoE on ACX Series Universal Access Routers on page 142
On ACX1100 routers, you can configure a service package on the router for the RFC
2544-based benchmarking test, or for NAT and IPsec applications. When you configure
the service package for the RFC 2544-based benchmarking test or for the NAT and IPsec
applications, a reboot of the Forwarding Engine Board (FEB) occurs to apply the service
package selection. By default, the service package for RFC 2544 benchmarking test is
selected. The selection of a service package is needed on ACX1100 routers when you
configure such routers for IEEE 1588v2 Precision Time Protocol (PTP) because both RFC
2544-based benchmarking tests and a combination of NAT and IPsec protocols are not
supported simultaneously; you can configure only PTP and RFC 2544-based tests, or
PTP and the combination of NAT and IPsec at a point in time.
You need to specify the service package to be RFC 2544-based or NAT and IPsec-based
only for ACX1100-AC routers. The selection of a service package is not needed on ACX
Series routers other than the ACX1100-AC and ACX500 routers because on such routers,
only the RFC 2544-based benchmarking tests are supported; NAT and IPsec applications
are not supported on those routers.
To configure the RFC 2544-based service package on a particular FPC, include the
service-package bundle-rfc2544
level.
[edit chassis]
fpc slot-number {
service-package bundle-rfc2544;
}
To configure the NAT and IPsec applications service package on a particular FPC, include
the
service-package bundle-nat-ipsec
hierarchy level.
[edit chassis]
fpc slot-number {
service-package bundle-nat-ipsec;
}
service-package on page 1714
To monitor Fast Ethernet and Gigabit Ethernet interfaces and begin the process of isolating
interface problems when they occur.
: 0.0 W
: 0
statement at the
[edit chassis fpc slot-number]
statement at the
[edit chassis fpc slot-number]
Copyright © 2017, Juniper Networks, Inc.
hierarchy