Table of Contents
Advertisement
Maintaining the SSR1200 Hardware Components
To maintain optimum performance of the appliance, you must regularly perform the following preventive
maintenance procedures:
• Inspect the installation site for moisture, loose wires or cables, and excessive dust.
• Ensure that airflow is unobstructed around the appliance and into the air intake vents.
The power supplies and transceivers are the only FRUs that can be replaced on the SSR1200. For any
other issues, contact Juniper customer support. See
Chassis or Components" on page
SSR1200 Power Supply Maintenance
SUMMARY
Maintaining an SSR1200 appliance includes replacing
power supplies. Replacing includes removing a failed
power supply and installing a functional power
supply.
Replacing an AC Power Supply on the SSR1200
IN THIS SECTION
Removing the AC Power Supply from an SSR1200 | 46
Installing the AC Power Supply in an SSR1200 | 46
The two AC power supplies (part number: SSR1200-AC-PS) are hot-removable and hot-insertable field-
replaceable units (FRUs) installed in the rear panel of the SSR1200 appliance. You can remove and
replace them without powering off the SSR1200 or disrupting SSR1200 functions.
"Contacting Customer Support and Returning the
50.
IN THIS SECTION
Replacing an AC Power Supply on the
SSR1200 | 45
45
Advertisement
Table of Contents
