Ip Igmp Last-Member-Query-Interval; Ip Igmp Query-Interval - NETGEAR M6100 Series Reference Manual

no ip igmp last-member-query-count
This command resets the number of Group-Specific Queries to the default value.
Format
no ip igmp last-member-query-count
Modes Interface Config

ip igmp last-member-query-interval

This command configures the Maximum Response Time inserted in Group-Specific Queries
which are sent in response to Leave Group messages. The range for deciseconds is 0 to
255 tenths of a second. This value can be configured on one interface or a range of
interfaces
Default 10 tenths of a second (1 second)
Format
ip igmp last-member-query-interval deciseconds
Modes Interface Config
no ip igmp last-member-query-interval
This command resets the Maximum Response Time to the default value.
Format
no ip igmp last-member-query-interval
Modes Interface Config

ip igmp query-interval

This command configures the query interval for the specified interface or range of interfaces.
The query interval determines how fast IGMP Host-Query packets are transmitted on this
interface. The range for the seconds argument is 1 to 3600 seconds.
Default 125 seconds
Format
ip igmp query-interval seconds
Modes Interface Config
no ip igmp query-interval
This command resets the query interval for the specified interface to the default value. This is
the frequency at which IGMP Host-Query packets are transmitted on this interface.
Format
no ip igmp query-interval
Modes Interface Config
M6100 Series Switches
IP Multicast Commands
1098