Show Ipv6 Pim Rp-Hash; Show Ipv6 Pim Rp Mapping - NETGEAR M6100 Series Reference Manual

show ipv6 pim rp-hash

This command displays which rendezvous point (RP) is being used for a specified group that
you must specify with the group-address argument.
Format
show ipv6 pim rp-hash group-address
Modes Privileged EXEC
User EXEC
Term Definition
RP Address The IPv6 address of the RP for the group specified.
Type Indicates the mechanism (BSR or static) by which the RP was selected.
Command example:
(NETGEAR) #show ipv6 pim rp-hash 224.1.2.0
RP Address192.168.10.1
Type Static
Command example:
If no RP Group mapping exists on the router, the following message is displayed:
No RP-Group mappings exist/learned on this router.

show ipv6 pim rp mapping

Use this command to display the mapping for the PIM group to the active Rendezvous points
(RP) of which the router is a aware (either configured or learned from the bootstrap router
[BSR]). Use the optional parameters to limit the display to a specific RP address
(rp-address) or to view group-to-candidate RP (candidate) or group to Static RP
mapping information (static).
Format
show ipv6 pim rp mapping [rp-address | candidate | static]
Modes Privileged EXEC
User EXEC
Term Definition
RP Address The IPv6 address of the RP for the group specified.
Group Address The IPv6 address and prefix length of the multicast group.
M6100 Series Switches
IPv6 Multicast Commands
1127