Chassis - NETGEAR M6100 Series Reference Manual

Table 69. DVMRP Log Messages (continued)
Component Message
DVMRP DVMRP protocol initialization sequence Failed.
DVMRP DVMRP All Routers Address - xxx Delete from
the DTL Mcast List Failed for intf – xxx.
DVMRP Mcast Forwarding Mode Disable Failed for intf –
xxx.
DVMRP DVMRP All Routers Address - xxx Add to the
DTL Mcast List Failed for intf – xxx.
DVMRP Mcast Forwarding Mode Enable Failed for intf –
xxx.
DVMRP DVMRP Probe Control message Send Failed on
rtrIfNum – xxx.
DVMRP DVMRP Prune Control message Send Failed;
rtrIfNum – xxx.
DVMRP DVMRP Probe Control message Send Failed on
rtrIfNum –xxx.

Chassis

Table 70. EDB Log Message
Component Message
EDB EDB Callback: Unit Join: num.
M6100 Series Switches
NETGEAR Managed Switch Software Log Messages
1178
Cause
This could be due to the non-availability of some
resources. This message appears when trying to
enable DVMRP Protocol.
DMVRP All Routers Address deletion from the local
multicast list Failed. As a result of this, DVMRP
Multicast packets are still received at the application
though DVMRP is disabled.
The Multicast Forwarding mode Disable Failed for
this routing interface.
DMVRP All Routers Address addition to the local
multicast list Failed. As a result of this, DVMRP
Multicast packets with this address will not be
received at the application.
The Multicast Forwarding mode Enable Failed for
this routing interface. As a result of this, the ability to
forward Multicast packets does not function on this
interface.
DVMRP Probe control message send failed. This
could mostly be because of a Failure return status of
the socket call sendto(). As a result of this, the
DVMRP neighbor could be lost in the neighboring
DVMRP routers.
Neighbor - %s, SrcAddr - %s, GrpAddr - %s DVMRP
Prune control message send failed. This could
mostly be because of a Failure return status of the
socket call sendto(). As a result of this, the unwanted
multicast traffic is still received and forwarded.
DVMRP Probe control message send failed. This
could mostly be because of a Failure return status of
the socket call sendto(). As a result of this, the
DVMRP neighbor could be lost in the neighboring
DVMRP routers.
Cause
Unit num has joined the chassis.