Ip Igmp Query-Max-Response-Time; Ip Igmp Robustness - NETGEAR M6100 Series Reference Manual

ip igmp query-max-response-time

This command configures the maximum response time interval for the specified interface or
range of interfaces, which is the maximum query response time advertised in IGMPv2
queries on this interface. The deciseconds argument is the time interval, specified in 0 to
255 tenths of a second.
Default 100
Format
ip igmp query-max-response-time desciseconds
Mode Interface Config
no ip igmp query-max-response-time
This command resets the maximum response time interval for the specified interface, which
is the maximum query response time advertised in IGMPv2 queries on this interface to the
default value. The maximum response time interval is reset to the default time.
Format
no ip igmp query-max-response-time
Mode Interface Config

ip igmp robustness

This command configures the robustness that allows tuning of the interface or range of
interfaces. The robustness is the tuning for the expected packet loss on a subnet. If a subnet
is expected to have a lot of loss, the Robustness variable may be increased for the interface.
The number argument specifies the packet loss number in the range from 1 to 255.
Default 2
Format
ip igmp robustness number
Mode Interface Config
no ip igmp robustness
This command sets the robustness value to default.
Format
no ip igmp robustness
Mode Interface Config
M6100 Series Switches
IP Multicast Commands
1099