Show Ipv6 Mld-Proxy - NETGEAR M6100 Series Reference Manual

show ipv6 mld-proxy

Use this command to display a summary of the host interface status parameters.
Format
show ipv6 mld-proxy
Mode Privileged EXEC
User EXEC
The command displays the following parameters only when you enable MLD-Proxy.
Field
Interface Index
Admin Mode
Operational Mode
Version
Number of Multicast Groups
Unsolicited Report Interval
Querier IP Address on Proxy
Interface
Older Version 1 Querier Timeout The interval used to timeout the older version 1 queriers.
Proxy Start Frequency
Command example:
(NETGEAR Routing) #show ipv6 mld-proxy
Interface Index..................................... 1/0/3
Admin Mode.......................................... Enable
Operational Mode.................................... Enable
Version............................................. 3
Num of Multicast Groups............................. 0
Unsolicited Report Interval......................... 1
Querier IP Address on Proxy Interface............... fe80::1:2:5
Older Version 1 Querier Timeout..................... 00:00:00
Proxy Start Frequency................................
M6100 Series Switches
Description
The interface number of the MLD-Proxy.
Indicates whether MLD-Proxy is enabled or disabled. This is a configured value.
Indicates whether MLD-Proxy is operationally enabled or disabled. This is a status
parameter.
The present MLD host version that is operational on the proxy interface.
The number of multicast groups that are associated with the MLD-Proxy interface.
The time interval at which the MLD-Proxy interface sends unsolicited group
membership report.
The IP address of the Querier, if any, in the network attached to the upstream interface
(MLD-Proxy interface).
The number of times the MLD-Proxy has been stopped and started.
IPv6 Multicast Commands
1137