Show Ip Pim Bsr-Router - NETGEAR M6100 Series Reference Manual

Command example:
(NETGEAR) #show ip pim neighbor 1/0/1
Neighbor Addr Interface Uptime
--------------- --------- ----------- ----------- --------
192.168.10.2 1/0/1
(NETGEAR) #show ip pim neighbor
Neighbor Addr Interface
--------------- ---------
192.168.10.2 1/0/1
192.168.20.2 1/0/2
Command example:
If no neighbors were learned on any of the interfaces, the following message is displayed:
No neighbors exist on the router.

show ip pim bsr-router

This command displays the bootstrap router (BSR) information.
Format
show ip pim bsr-router {candidate | elected}
Mode Privileged EXEC
User EXEC
Parameter
BSR Address
BSR Priority
BSR Hash Mask Length Length of a mask (maximum 32 bits) that is to be ANDed with the group address before the
C-BSR Advertisement
Interval
Next Bootstrap Time (in hours, minutes, and seconds) in which the next bootstrap message is due from this
Message
Command example:
(NETGEAR) #show ip pim bsr-router elected
M6100 Series Switches
Expiry Time DR
(hh:mm:ss) (hh:mm:ss)
00:02:55 00:01:15
Uptime Expiry Time DR
(hh:mm:ss) (hh:mm:ss)
----------- ----------- --------
00:02:55 00:01:15
00:03:50 00:02:10
Definition
IP address of the BSR.
Priority as configured in the ip pim bsr-candidate command.
hash function is called. This value is configured in the ip pim bsr-candidate command.
Indicates the configured C-BSR Advertisement interval with which the router, acting as a
C-BSR, will periodically send the C-BSR advertisement messages.
BSR.
IP Multicast Commands
1093
Priority
NA
Priority
1
1