Ip Multicast; Ip Multicast Ttl-Threshold - NETGEAR M6100 Series Reference Manual

Format
no ip mroute src-ip-addr
Mode Global Config

ip multicast

This command sets the administrative mode of the IP multicast forwarder in the router to
active.
Default disabled
Format
ip multicast
Mode Global Config
no ip multicast
This command sets the administrative mode of the IP multicast forwarder in the router to
inactive.
Format
no ip multicast
Mode Global Config

ip multicast ttl-threshold

This command is specific to IPv4. Use this command to apply the given Time-to-Live
threshold value to a routing interface or range of interfaces. The ttlvalue is the TTL
threshold which is to be applied to the multicast Data packets which are to be forwarded from
the interface. This command sets the Time-to-Live threshold value such that any data
packets forwarded over the interface having TTL value above the configured value are
dropped. The value for ttlvalue ranges from 0 to 255.
Default 1
Format
ip multicast ttl-threshold ttlvalue
Mode Interface Config
no ip multicast ttl-threshold
This command applies the default TTL threshold to a routing interface. The TTL threshold is
the TTL threshold which is to be applied to the multicast Data packets which are to be
forwarded from the interface.
Format
no ip multicast ttl-threshold
Mode Interface Config
M6100 Series Switches
IP Multicast Commands
1071