Show Ip Pim Rp Mapping - NETGEAR M6100 Series Reference Manual

show ip pim rp mapping

Use this command to display the mapping for the PIM group to the active Rendezvous points
(RP) of which the router is a aware (either configured or learned from the bootstrap router
(BSR)). Use the optional parameters to limit the display to a specific RP address
(rp-address)or to view group-to-candidate RP (candidate) or group to Static RP
mapping information (static).
Format
show ip pim rp mapping [rp-address | candidate | static]
Modes Privileged EXEC
User EXEC
Term Definition
RP Address The IP address of the RP for the group specified.
Group Address The IP address of the multicast group.
Group Mask The subnet mask associated with the group.
Origin Indicates the mechanism (BSR or static) by which the RP was selected.
C-RP Indicates the configured C-RP Advertisement interval with which the router acting as a Candidate
Advertisement RP will periodically send the C-RP advertisement messages to the elected BSR.
Interval
Command example:
(NETGEAR) #show ip pim rp mapping 192.168.10.1
RP Address 192.168.10.1
Group Address 224.1.2.1
Group Mask 255.255.255.0
Origin Static
Command example:
(NETGEAR) #show ip pim rp mapping
RP Address 192.168.10.1
Group Address 224.1.2.1
Group Mask 255.255.255.0
Origin Static
RP Address 192.168.20.1
Group Address 229.2.0.0
Group Mask 255.255.0.0
Origin Static
M6100 Series Switches
IP Multicast Commands
1095