Show Ip Igmp Interface Membership - NETGEAR M6100 Series Reference Manual

Term Definition
Last Member The Maximum Response Time inserted into Group-Specific Queries sent in response to Leave
Query Interval Group messages.
Last Member The number of Group-Specific Queries sent before the router assumes that there are no local
Query Count members.

show ip igmp interface membership

This command displays the list of interfaces that registered in the multicast group. The
multiipaddr argument specifies the IP address of the multicast group.
Format
show ip igmp interface membership multiipaddr [detail]
Mode Privileged EXEC
Term Definition
Interface Valid unit, slot and port number separated by forward slashes.
Interface IP The IP address of the interface participating in the multicast group.
State The interface that has IGMP in Querier mode or Non-Querier mode.
Group The group compatibility mode (v1, v2 or v3) for the specified group on this interface.
Compatibility Mode
Source Filter Mode The source filter mode (Include/Exclude) for the specified group on this interface. This is "-----" for
IGMPv1 and IGMPv2 Membership Reports.
If you use the detail keyword, the following fields display.
Term Definition
Interface Valid unit, slot and port number separated by forward slashes.
Group The group compatibility mode (v1, v2 or v3) for the specified group on this interface.
Compatibility Mode
Source Filter Mode The source filter mode (Include/Exclude) for the specified group on this interface. This is "-----" for
IGMPv1 and IGMPv2 Membership Reports.
Source Hosts The list of unicast source IP addresses in the group record of the IGMPv3 Membership Report with
the specified multicast group IP address. This is "-----" for IGMPv1 and IGMPv2 Membership
Reports.
Expiry Time The amount of time remaining to remove this entry before it is aged out. This is "-----" for IGMPv1
and IGMPv2 Membership Reports.
M6100 Series Switches
IP Multicast Commands
1103