Session-Timeout; Telnetcon Maxsessions - NETGEAR ProSafe GSM7324 Command Line Interface Reference Manual

Command Line Interface Reference for the ProSafe 7300 Series Layer-3 Switches, Software Ver-

3.3.5 session-timeout

This command sets the telnet session timeout value.The timeout value unit of time is
minutes. A value of 0 indicates that a session remains active indefinitely.
Default
Format
Mode
3.3.5.1 no session-timeout
This command sets the telnet session timeout value to the default. The timeout value unit
of time is minutes.
Format
Mode

3.3.6 telnetcon maxsessions

This command specifies the maximum number of telnet connection sessions that can be
established. A value of 0 indicates that no telnet connection can be established. The range
is 0 to 5.
Default
Format
Mode
3.3.6.1 no telnetcon maxsessions
This command sets the maximum number of telnet connection sessions that can be
established to the default value.
Format
Mode
3-10
0
session-timeout <0-160>
Line Config
no session-timeout
Line Config
5
telnetcon maxsessions <0-5>
Privileged EXEC
no telnetcon maxsessions
Privileged EXEC
v1.0, December 2005
Administrative Access Commands