Session-Timeout (Captive Portal) - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

Format
max-total-octets <0-4294967295>
Mode Captive Portal Instance mode

session-timeout (Captive Portal)

Use this command to configure the session timeout for a captive portal configuration.
After this limit has been reached, the user will be disconnected. Timeout is time in
seconds.
0 indicates timeout not enforced.
Default 0
Format
session-timeout <0-86400>
Mode Captive Portal Instance mode
no session-timeout
Use this command to reset the session timeout to the default.
Format
session-timeout <0-86400>
Mode Captive Portal Instance mode
idle-timeout
Use this command to configure the idle timeout for a captive portal configuration.
indicates timeout not enforced.
disconnected
.
Default 0
Format
idle-timeout <0-900>
Mode Captive Portal Instance mode
no idle-timeout
Use this command to reset the idle timeout to the default.
Captive Portal Commands
After an idle session has been reached this, the user will be
v1.0, July 2009
Managed Switch CLI Manual, Release 8.0
0
9-12