Lldp Notification; Lldp Transmit-Mgmt - NETGEAR ProSAFE M7100-24X Reference Manual

ProSAFE M7100 Managed Switches
no lldp transmit-tlv
Use this command to remove an optional TLV from the LLDPDUs. Use the command without
parameters to remove all optional TLVs from the LLDPDU.
Format
no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode Interface Config

lldp transmit-mgmt

Use this command to include transmission of the local system management address information in
the LLDPDUs.
Default enabled
Format
lldp transmit-mgmt
Mode Interface Config
no lldp transmit-mgmt
Use this command to include transmission of the local system management address information in
the LLDPDUs. Use this command to cancel inclusion of the management information in LLDPDUs.
Format
no lldp transmit-mgmt
Mode Interface Config

lldp notification

Use this command to enable remote data change notifications.
Default disabled
Format
lldp notification
Mode Interface Config
no lldp notification
Use this command to disable notifications.
Default disabled
Format
no lldp notification
Mode Interface Config
Switching Commands
138