Show Ip Vrrp Interface Stats - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Manual

no ip vrrp track ip route
Use this command to remove the route from the tracked list or to restore the priority decrement to
its default. When removing a tracked IP route from the tracked list, the priority should be
incremented by the decrement value if the route is not reachable.
Format
no ip vrrp <vrid> track ip route <ip-address/prefix-length>
[decrement]
Mode Interface Config

show ip vrrp interface stats

This command displays the statistical information about each virtual router configured on the
switch.
Format
show ip vrrp interface stats <unit/slot/port> <vrid>
Modes • Privileged EXEC
• User EXEC
Term Definition
Uptime The time that the virtual router has been up, in days, hours, minutes and seconds.
Protocol The protocol configured on the interface.
State The total number of times virtual router state has changed to MASTER.
Transitioned to
Master
Advertisement The total number of VRRP advertisements received by this virtual router.
Received
Advertisement The total number of VRRP advertisements received for which advertisement interval is
Interval Errors
different than the configured value for this virtual router.
Authentication The total number of VRRP packets received that don't pass the authentication check.
Failure
IP TTL errors The total number of VRRP packets received by the virtual router with IP TTL (time to live)
not equal to 255.
Zero Priority The total number of VRRP packets received by virtual router with a priority of '0'.
Packets
Received
Zero Priority The total number of VRRP packets sent by the virtual router with a priority of '0'.
Packets Sent
Routing Commands
Managed Switch CLI Manual, Release 8.0
v1.0, July 2009
4-31