And Enable The Dhcp Client For The Management Interface - NETGEAR AV Series User Manual

• Subnet Mask: The IP subnet mask for the management interface. This is also
referred to as the subnet/network mask and defines the portion of the interface's
IP address that is used to identify the attached network.
The default value is 255.255.0.0.
• Default Gateway: The gateway through which the management interface can
be reached.
The default value is 0.0.0.0.
WARNING: If you are logged in to switch over the management interface, when
you click the Apply button, you are disconnected and need to log in to the switch
at the new IP address.
6. Click the Apply button.
Your settings are saved. The window closes. The Overview page displays again.
7. To save the settings to the running configuration, at the top of the page, click the
Save icon or text.
Enable the DHCP client for the management interface
By default, the DHCP client for the management interface is enabled. If you set a fixed
IP address for the management interface, the DHCP client is disabled. You can enable
the DHCP client again.
To enable the DHCP client for the management interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4. In the Device Details section, below the Management IP Address field, click the
pencil icon.
The Edit Management IP Address window displays.
5. From the Management IP Settings menu, select DHCP Client.
Manage and monitor the switch
AV Line of Fully Managed Switches M4250 Series
79 Audio Video User Manual