Configure The Cos Trust Mode Settings Globally - NETGEAR S3600 Series User Manual

S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
based on the existing port default priority as mapped to a traffic class by the current
802.1p mapping table.
Alternatively, when a port is configured as untrusted, it does not trust any incoming
packet priority designation and uses the port default priority value instead. All packets
arriving at an untrusted port are directed to a specific CoS queue on the appropriate
egress ports, in accordance with the configured default priority of the ingress port. This
process is also used in situation in which a trusted port mapping cannot be honored,
such as when a non-IP packet arrives at a port configured to trust the IP DSCP value.
Configure the CoS trust mode settings
globally
A global CoS trust mode configuration setting is applied to all interfaces on the switch.
To configure the CoS trust mode globally:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network,
or connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser and enter the IP address of the switch in the address field of
your web browser.
If you do not know the IP address of the switch, see Access the switch on-network
and connected to the Internet on page 25 or Access the switch off-network and not
connected to the Internet on page 32.
The Device Admin Password page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 35.
3. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight Cloud Portal or Insight
app, enter the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 34.
4. Click the Login button.
The Dashboard page displays.
5. Select QoS > CoS > CoS Configuration.
The CoS Configuration page displays.
6. From the Global Trust Mode menu, select the trust mode:
Configure Quality of Service 351 User Manual