Lacp Partner Admin State Longtimeout - NETGEAR ProSafe GSM7228PS Cli Manual

Note: This command is only applicable to physical interfaces.
no lacp partner admin state individual
Use this command to set the LACP partner admin state to aggregation.
Format
no lacp partner admin state individual
Mode Interface Config

lacp partner admin state longtimeout

Use this command to set LACP partner admin state to longtimeout.
Format
lacp partner admin state longtimeout
Mode Interface Config
Note: This command is only applicable to physical interfaces.
no lacp partner admin state longtimeout
Use this command to set the LACP partner admin state to short timeout.
Format
no lacp partner admin state longtimeout
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-98