Configure The Dot1X Authentication List - NETGEAR M4300 User Manual

M4300 Series and M4300-96X Fully Managed Switches User Manual
The options are as follows:
Enable. The privileged EXEC password is used for authentication.
-
Line. The line password is used for authentication.
-
None. The user cannot be authenticated.
-
RADIUS. The user's name and password are authenticated using the RADIUS server
-
instead of local server.
TACACS. The user's name and password are authenticated using the TACACS
-
server.
Deny. Authentication always fails.
-
Click the Add button.
8.
The login list is added to the switch.

Configure the Dot1x Authentication List

You can configure a dot1x list. A dot1x list specifies the authentication methods to validate
port access for the users associated with the list. Only one dot1x method can be supported.
The default list is dot1xList.

To configure the dot1x authentication list:
Launch a web browser.
1.
In the address field of your web browser, enter the IP address of the switch.
2.
The login window opens.
Enter the user name and password.
3.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
Click the Login button.
4.
The System Information page displays.
Select Security > Management Security > Authentication List > Dot1x Authentication
5.
List.
Manage Device Security
503