Set Arp-Tx-Interval Command; Set Self-Loop-Discovery Admin_Status Command; Set Boot Bank Command - Avaya P333T User Manual

Chapter 6 Cajun Campus CLI – Layer 2

Set arp-tx-interval Command

Use the set arp-tx-interval command to set the keep-alive signal interval. Setting the
interval to 0 disables the keep alive signal.
The syntax for this command is:
set arp-tx-interval <value>
<value> - interval (seconds)
Example:
Cajun_P330-N# set arp-tx-interval 15
ARP tx interval was set to 15 seconds.

Set self-loop-discovery Admin_status Command

Use the set self-loop-discovery Admin_Status command to enable or
disable IBM token ring discovery mode.
The syntax for this command is:
set self-loop-discovery Admin_Status <enable|disable> <modul
num>
Example:
Cajun_P330-N# set self-loop-discovery Admin_Status enable 1

Set boot bank Command

Use the set boot bank command to set the Avaya P330 boot bank.
The syntax for this command is:
set boot bank <value>\
<value> - { bank-a | bank-b }
Example:
Cajun_P330-N# set boot bank bank-a
104 Avaya P333T User's Guide