Sync Time; Tech - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
Example:
P460-1(super)# sync spv
This command may overwrite the neighbor SPV software and
reset it
*** Confirmation *** - do you want to continue (Y/N)? y
Copying Bank A to the neighbor SPV ...
Copying Bank A to the neighbor SPV done
Copying Bank B to the neighbor SPV ...
Copying Bank B to the neighbor SPV done
Copying Embedded Web image to the neighbor SPV ...
Copying Embedded Web image to the neighbor SPV done
Setting boot bank of the neighbor SPV ...
Setting boot bank of the neighbor SPV done
Setting chassis sync on for the neighbor SPV...
Setting chassis sync on for the neighbor SPV done
SPVs are resetting.
Please wait till the process is finished. The SPVs will be
synchronized after the reset is completed
The configuration is synchronized after you perform a reset.

sync time

User level: read-write, admin.
Use the sync time command to synchronize the time used by all modules in the
switch.
The syntax for this command is:
sync time
Example:
P460-1# sync time
Time has been distributed.

tech

Use the tech command to enter tech mode. This command is reserved for service
personnel use only.
182 Avaya P460 Reference Guide