Show Port Channel - Avaya P460 Reference Manual

Example:
P460-1> show port auto-negotiation-flowcontrol-
advertisement asym-tx-only 4/49
Port 4/49 pause capabilities was set

show port channel

User level: read-only, read-write, admin.
Use the show port channel command to display Link Aggregation Group
(LAG) information for a specific switch or port.
The syntax for this command is:
show port channel [<module>[/<port>]] [info]
module
(Optional)
port
(Optional)
info
Example:
P460-1> show port channel
Port Channel Status
---- ---------------
3/1
3/2
3/3
3/4
3/13
P460-1> show port channel 3/3 info
Port
------ ------ ------- ----- --------- -------- --------
3/3
Avaya P460 Reference Guide
Number of the module (3-6). If you do not specify a number,
the modules on all the switch are shown.
Number of the port on the module. If you do not specify a
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
Displays full information on the port
off
off
on
on
off
Speed Duplex Vlan
10 half 1
Chapter 2
Channel Name and Id
-------------------
server1
server1
Port Trunk
Priority status
0 off
Avaya P460 CLI Commands
Vlan
Binding
static
159