Show Arp-Aging-Interval; Show Allowed Managers Status; Show Allowed Managers Table - Avaya P334T-ML User Manual

show arp-aging-interval

Use the show arp-aging-interval command to display the ARP table aging
interval for gateways' entries.
The syntax for this command is:
show arp-aging-interval
Output Example:
P330-N> show arp-aging-interval
ARP table aging interval for gateways was set to 10 minutes.

show allowed managers status

Use the show allowed managers status command to display the activation
status of the Allowed Managers feature. When this feature is enabled, only those
stations whose IP addresses are listed in the Allowed Managers table can access the
device over Telnet, SNMP, or HTTP.
The syntax for this command is:
show allowed managers status
Output Example:
P330-N> show allowed managers status
Managers are disabled.

show allowed managers table

Use the show allowed managers table command show the list of the twenty
possible allowed managers IP addresses.
show allowed managers table
Output Example:
P330-N> show allowed managers table
1 ) 149.49.32.134
2 ) Not Used
3 ) Not Used
4 ) Not Used
5 ) Not Used
6 ) Not Used
7 ) Not Used
8 ) Not Used
Avaya P334T-ML User's Guidee
Chapter 6 CLI – Layer 2
89