Equipment Required - Nortel Meridian 1 Manual

4-2 SL-1 ST and STE system upgrades

Equipment required

553-3001-250 Standard 14.00 August 1996
— for those customers who so choose, sending the customer database disks
to Northern Telecom for conversion
— for those customers who choose to convert the database on-site,
converting the customer database to X11 release 21 compatibility
Table 4-1 lists the items required to upgrade an AC- or DC-powered
ST system to an STE system. Some configurations may require items not
included in the table. All required items must be identified and on hand before
you begin the upgrade.
Letters at the end of the part number represent the minimum vintage of the
upgrade equipment. Only equipment of that vintage or later can be used.
Refer to Product compatibility (553-3001-156) for equipment compatibility
information.
Table 4-1
Hardware requirements for an AC- or DC-powered STE system
Quantity Part number
1 NTND01CA
1 NTND02BA
1 NTND31AB
1 NTND37AA
1 NT9D33
and
1 NT9D34
1 NT9D47
and
1 NT9D66
1 QPC940
Note 1: Not included in upgrade package. Must be ordered separately if required
for on-site database conversion.
Note 2: Refer to Table 4-2 for ROM cards required during on-site database
conversion.
Description
ICM card w/2 MB Memory
Misc/SDI/Peripheral Signaling card (MSPS)
ROM card
Dual SDI Cable
Small System Multi Drive Unit
Enhanced Mass Storage Interface card
EMSI to SMDU Data Cable
EMSI to SMDU Power Cable
ROM card (Notes 1, 2)