Nortel Meridian 1 Manual page 941

7 Configure networks as CNI groups, based on the number of CNI cards in
the system. In a typical configuration, there are three CNI cards for five
network groups (see Tables 12-38 and 12-39). Refer to X11 input/output
guide (553-3001-400) for a complete description of the Configuration
Record (LD 17).
Table 12-38
LD 17: Configuring CNI groups
Prompt Response
REQ CHG
TYPE CFN
•
CEQU YES
•
EXT0 3PE
_CNI s p g
•
EXT1 3PE
_CNI s p g
•
Table 12-39
Typical CNI configurations
CNI card slot
8
8
9
9
10
10
Note: Each port on the CNI card provides functions similar to one QPC215 SBE
Card in an XT system. You do not have to configure both ports on the CNI card.
Upgrade system installation Upgrading to Meridian 1 system options
Upgrades to Meridian 1 option 81
Comments
Core 0 extended to 3PE
s = card slot (8-12)
p = port (0 or 1)
g = network group (0-4)
Core 1 extended to 3PE
s = card slot (8-12)
p = port (0 or 1)
g = network group (0-4)
Port
0 pre-configured as "group 5"
1
0
1
0
1
Network group
Group 0
Group 1
Group 2
Group 3
Group 4
12-177