Nortel Meridian 1 Manual page 632

Refer to Upgrade engineering (553-3001-150) for additional information on
cable requirements.
An NT8D01 Controller card is provided to support the intelligent peripheral
cards in the new IPE module. If analog peripheral cards are used in the IPE
module, one NT8D21 Ringing Generator must be installed.
Table 9-7
Hardware requirements for an AC-powered option 61C (Part 1 of 2)
Qty Part number
1 NT1R91AA
2 NT5D20AA
2 NT5D21AA
2 NT6D65AA
2 NT6D66
1 NT7D00AA
1 NT8D01BC
1 NT8D04BA
1 NT8D06AA
2 NT8D17FA
1 NT8D22AC
1 NT8D27BB
2 NT8D29AB
1 NT8D37BA
2 NT8D41AA
3 NT8D44AA
1 NT8D46AG
Upgrade system installation Upgrading to Meridian 1 system options
Meridian 1 option 51 upgrades
Description
Modem Kit
I/O Processor and Multi Disk Unit
Core/Network module, AC
Core to Network Interface card (CNI)
Call Processor card (CP) (Note 1)
Top Cap, AC
Controller-Four card
Superloop Network card
Peripheral Equipment Power Supply, AC
Conference/TDS card
System Monitor
Pedestal, AC
Common Equipment Power Supply, AC
Intelligent Peripheral Equipment module, AC
(Note 2)
Dual-Port SDI Paddle Board
SDI Paddle Board to I/O Cable
System Monitor to SDI Paddle Board Cable (34 in.)
9-53