Nortel Meridian 1 Manual page 121

4-42 SL-1 ST and STE system upgrades
553-3001-250 Standard 14.00 August 1996
46 Perform a data dump:
LD 43
EDD
When "DATABASE BACKUP COMPLETE" or "DATADUMP
COMPLETE" displays on the terminal, enter
****
If the data dump is not successful, do not continue; contact your
technical support organization. A data dump problem must be
corrected before proceeding.
47 To continue ugrading the STE to release 21, proceed with step 48. If you
are upgrading the STE to an option 51C or 61C X11 release 22, remove
the database disk and use the procedures in Upgrade system installation
to X11 release 22 (553-3001-258) to upgrade the system hardware and
convert the software to release 22.
48 Verify the system by using the test procedures described in Meridian 1
system installation procedures (553-3001-210) and X11 input/output
guide (553-3001-400). Clear any faults discovered during testing.
49 Follow "Postconversion procedure" in Software conversion procedures
(553-2001-320).
The SL-1 X11 release 21 STE system is now operational. Install all covers to
complete the upgrade.
to load the program
to begin the data dump
to exit the program
CAUTION