Required Installation Tools; Required Tools For Hardware Installation; Required Tools For Software Installation Or Upgrade - Nortel Remote Gateway 9150 Installation And Administration Manual

Installing the Remote Gateway 9150 unit

Required installation tools

This section describes the tools necessary for Remote Gateway 9150
installation.

Required tools for hardware installation

You need the following tools to install the Remote Gateway 9150 unit, or to
install or replace DSP application or trunk interface modules:
antistatic ESD wrist strap (recommended)
Phillips (cross-head) screwdriver
pen or pencil for
— noting the installation location (if mounting on a wall)
— noting cable lengths
— labeling cables
cable tie wraps
cable identification labels
tape measure
four wood screws if you want to mount the Remote Gateway 9150 unit on
the wall

Required tools for software installation or upgrade

You need the following items for software installation or upgrade:
Remote Gateway 9100 Series Product CD-ROM
PC with a CD-ROM drive or an Internet connection for obtaining software,
firmware, and documentation updates
TFTP server application installed on the PC
The TFTP server is required for performing firmware upgrades. If a TFTP
server is currently not installed, you can obtain one from the Internet.
88 Remote Gateway 9150 Installation and Administration Guide
Standard 4.0