Configuration 2-St System With Qca136 And Ce/Pe Module - Nortel Meridian 1 Manual

Configuration 2—ST system with QCA136 and CE/PE Module
Figure 13-6
Connecting system monitor—Configuration 2
QPC
704
AL1
QCA136 cabinet
(used as PE cabinet
— CPU removed)
MDF
553-5114
* NT8D46BF and NT8D46BH are used only if connections to the MDF are required.
Hardware installation procedure
The following procedure describes how to connect the system monitor in an
ST system equipped with a QCA136 cabinet and a CE/PE Module (see
Figure 13-6). The CPU is located in the module.
NT8D46BA
P2
NT8D46BH*
Upgrade system installation Upgrading to Meridian 1 system options
System monitor upgrade installation
NT8D46AX
master
NT8D46BF*
system
monitor
J3
J1
P1
P1
J2
P1
Module
13-17
CE/PE