Nortel Meridian 1 Manual page 159

4-80 SL-1 ST and STE system upgrades
553-3001-250 Standard 14.00 August 1996
Performing a data dump
Before converting your customer database, you must perform a data dump to
your current disks by using the Equipment Data Dump Program (LD 43).
1 Log into the ST/STE system.
2 Load the Equipment Data Dump Program (LD 43). At the prompt, enter
LD 43
Always enter LD 43 from the source (current) media. Do not exit LD 43.
3 When "EDD000" appears on the terminal, enter
EDD
4 When "DATABASE BACKUP COMPLETE" or "DATADUMP
COMPLETE" displays on the terminal, enter
****
If the data dump is not successful, do not continue; contact your
technical support organization. A data dump problem must be
corrected before proceeding.
to load the program
to begin the data dump
to exit the program
CAUTION