Nortel Meridian 1 Manual page 506

Table 8-6
Hardware requirements for a DC-powered option 51C (Part 2 of 2)
Qty Part number
1 NT8D77
3 NT8D84AA
1 NT8D91AE
1 NTND15 and
1 QPC742F
1 QPC43R
1 QPC441F
1 QPC471H
1 QPC709D
1 QPC814
Note 1: One NT6D66AA (24 MB) or NT6D66DA (48 MB) CP card is required.
Note 2: One NT8D21AA Ringing Generator, AC, must be added for each IPE
module in which analog-type peripheral cards are to be used.
Note 3: Not provided in the upgrade package. Parts are required for on-site
database conversion.
Note 4: Determine whether additional NTND21AA Module side covers (to cover all
exposed sides of modules) and NT8D49AA Column Spacer Kits (to connect
modules side-to-side) are necessary and order separately.
Upgrade system installation Upgrading to Meridian 1 system options
Meridian 1 option 21 upgrades
Description
FDI/FDU Interface cable (Note 3)
SDI Paddle Board to I/O Cable (18 in.)
Network to Controller Cable (8 ft.)
4 MB Floppy Disk Unit (Note 3)
Floppy Disk Interface card (Note 3)
Peripheral Signaling Card (PS)
Three-Port Extender Card (3PE)
Clock Controller
Peripheral Signaling Card (Note 3)
768K Memory Card (Note 3)
8-63