Nortel Meridian 1 Manual page 233

5-48 SL-1 RT system upgrades
553-3001-250 Standard 14.00 August 1996
Table 5-5
Hardware requirements for a DC-powered option 61C (Part 2 of 2)
Qty Part number
2 NT8D99AB
2 NTND11BA
1 NTND13BC
6 NTND21AA
1 NTND15 and
1 QPC742F and
1 NT8D77
or
1 NTND16 and
1 QPC584L and
1 NT8D80
or
1 NTND16 and
1 NT9D34 and
1 NT9T89
2 QPC43R
1 QPC84S
1 NT8D80
2 QPC441F
2 QPC471H
Note 1: One NT6D66AA (24 MB) or NT6D66DA (48 MB) CP card is required.
Note 2: One NT6D42CC Ringing Generator, DC, must be added for each IPE
module in which analog-type peripheral cards are to be used.
Note 3: Not provided in the upgrade package. Parts are required for on-site
database conversion.
Description
CPU to Network Cable (2 ft.)
CP-to-CP Cable (6 ft.)
IOP to IOP SCSI Cable (6 ft.)
Module Side Cover
4 MB Floppy Disk Unit (Note 3)
Floppy Disk Interface card (Note 3)
Interface cable (Note 3)
4 MB Multi Disk Unit (Note 3)
Mass Storage Interface card (Note 3)
Interface cable (Note 3)
4 MB Multi Disk Unit (Note 3)
Enhanced MSI card (Note 3)
Interface cable (Note 3)
Peripheral Signaling card (PS)
Power Monitor
CPU/MDU Interface Cable (Note 3)
Three-Port Extender card (3PE)
Clock Controller