Nortel Meridian 1 Manual page 599

9-20 Meridian 1 option 51 upgrades
553-3001-250 Standard 14.00 August 1996
8 Press the RLD button on the NTND10 CMA card. System messages
similar to the following will appear:
SYS000
SYSLOAD RLS: xxISSUE:x
DONE
INI000
9 Log into the system.
10 Load the Equipment Data Dump Program (LD 43). At the prompt, enter
LD 43
Always enter LD 43 from the source (current) media. Do not exit LD 43.
When "EDD000" appears on the terminal, proceed to the next step.
11 Set the ENB/DIS switch on the MSI or EMSI card to DIS and remove the
card. Replace the QMM42 cartridge for release 19 software with the
QMM42 cartridge for release 21 software. Reinstall and enable the card.
12 Remove the disks containing release 19 software from the drives and
insert ED floppy disks with release 21 software into the NTND16 MDU
drives. Insert disk A1 in DRV A and disk B1 in DRV B.
13 Perform a data dump. At the prompt, enter
EDD
When "DATABASE BACKUP COMPLETE" or "DATADUMP
COMPLETE" appears on the terminal, proceed to the next step.
If the data dump is not successful, do not continue; contact your
technical support organization. A data dump problem must be
corrected before proceeding.
to load the program
to begin the data dump
CAUTION