Nortel Meridian 1 Manual page 976

13-12 System monitor upgrade installation
Table 13-2
Hardware requirements (Part 3 of 3)
Cabinet type
QCA147, two QCA137s,
and Meridian 1 Module(s)
Note 1: The NT8D46BF and NT8D46BH cables are only required when extending the alarm connections
to the main distribution frame (MDF).
Note 2: ST systems consisting of a single QCA136 cabinet require the installation of a QCAD309 Alarm
Adapter cable and one P0678258 Filter Connector.
Note 3: The NT6D81AA Power Regulator Card is required when a QCA136 cabinet is retained as part of
the upgraded system. Each cabinet requires one card that resides in any network or SDI card slot.
Note 4: The NT8D22AC System Monitor is required when a QCA136, QCA137, or QCA147 cabinet is
retained as part of the upgraded system.
Note 5: The QCAD310 Ground Cable must be installed in ST or RT systems using one or more QCA137
cabinets.
553-3001-250 Standard 14.00 August 1996
CPU location Hardware required (one of each)
QCA147 NT8D46BC System Monitor Cable
NT8D46BE System Monitor Cable
NT8D46BL System Monitor Cable
NT8D46BF System Monitor Cable (Note 1)
NT8D46BH System Monitor Cable (Note 1)
QCAD310 Ground Cable (Note 5)
Meridian 1 NT8D46BJ System Monitor Cable
Module NT8D46BC System Monitor Cable
NT8D46BD System Monitor Cable
NT8D46BE System Monitor Cable
NT8D46BF System Monitor Cable (Note 1)
NT8D46BH System Monitor Cable (Note 1)
QCAD310 Ground Cable (Note 5)
NT8D22AC System Monitor (Note 4)