Nortel Meridian 1 Manual page 216

17 In CPU 1, set the ENB/DIS switch on the QPC580 CPU Interface card to
DIS.
18 In CPU 1, set the ENB/DIS switch on the QPC581 CMA card to DIS.
19 Disconnect both cables from the QPC581 CMA card faceplate
connectors.
20 In CPU 1, remove the QPC581 CMA card.
21 On the NTND10 CMA card, connect pins 1 and 2 on the jumper at J3 and
install the card.
22 Connect the cables to the NTND10 CMA card; connect the bottom cable
first.
23 Set the ENB/DIS switch on the NTND10 CMA card in CPU 1 to ENB.
24 Remove the QPC583 Memory card from CPU 1.
25 Install the NTND09 Memory card in CPU 1.
26 In CPU 1, disconnect the cable between the QPC579 CPU Function card
and the QPC580 CPU Interface card.
27 In CPU 1, remove the QPC579 CPU card. Remove the QPC939 ROM
card and replace it with the NTND08 ROM card. Reinstall the CPU card.
Carefully align the connector pins when installing a ROM card.
Failure to use care may result in damage to one of the cards or system
failure.
28 In CPU 1, connect the cable to the QPC579 CPU Function card and the
QPC580 CPU Interface card.
29 Set the ENB/DIS switch on the QPC580 CPU Interface card in CPU 1 to
ENB.
30 In CPU 0, set the ENB/DIS switch on the QPC580 CPU Interface card to
DIS.
31 In CPU 0, set the ENB/DIS switch on the QPC581 CMA card to DIS.
Upgrade system installation Upgrading to Meridian 1 system options
SL-1 RT system upgrades
CAUTION
5-31