Nortel Meridian 1 Manual page 58

3-2 SL-1 L, LE, and N system upgrades
553-3001-250 Standard 14.00 August 1996
Network cables are required to connect peripheral shelves in the cabinet to
network cards in the column. The number of cables required depends on the
number of network cards installed. These are the cables:
— NT8D86AC cables that connect the network card and the peripheral
buffer card to the I/O panel
— NT9J96 cables that connect the I/O panel in the CPU/Network module to
the cabinet I/O panel
An NT8D01 Controller card is provided to support the intelligent peripheral
cards in the new IPE module. If analog peripheral cards are used in the IPE
module, one NT8D21 Ringing Generator must be installed.
Table 3-1
Hardware requirements for an AC-powered option 61C (Part 1 of 2)
Qty Part number
1 NT1R91AA
2 NT5D20AA
2 NT5D21AA
2 NT6D65AA
2 NT9D19AA
1 NT7D00AA
1 NT7D06AA
1 NT8D01BC
1 NT8D04BA
1 NT8D06AA
2 NT8D17FA
1 NT8D22AC
1 NT8D27BB
2 NT8D29AB
Description
Modem Kit
I/O Processor and Core Multi Drive Unit
Core/Network module, AC
Core to Network Interface card (CNI)
Call Processor card (CP)
Top Cap, AC
Filler Panel
Controller-Four card
Superloop Network card
Peripheral Equipment Power Supply, AC
Conference/TDS card
System Monitor
Pedestal, AC
Common Equipment Power Supply, AC