Nortel Meridian 1 Manual page 633

9-54 Meridian 1 option 51 upgrades
553-3001-250 Standard 14.00 August 1996
Table 9-7
Hardware requirements for an AC-powered option 61C (Part 2 of 2)
Qty Part number
1 NT8D46BH
1 NT8D52AB
1 NT8D53BB
1 NT8D75BD
2 NT8D80AZ
3 NT8D84AA
1 NT8D91AE
2 NT8D99AB
2 NTND11BA
1 NTND13BC
6 NTND21AA
2 QPC43R
1 QPC84S
2 QPC441F
2 QPC471H
Note 1: Two NT6D66AA (24 MB) or NT6D66DA (48 MB) CP cards are required.
Note 2: One NT8D21AA Ringing Generator, AC, must be added for each IPE
module in which analog-type peripheral cards are to be used.
Note 3: Determine whether additional NTND21AA module side covers (to cover all
exposed sides of modules) and NT8D49AA Column Spacer Kits (to connect
modules side-to-side) are necessary, and order separately.
Description
System Monitor to MDF Cable (32 ft.)
Pedestal Blower Unit, AC
Power Distribution Unit, AC
Clock Controller to Clock Controller Cable
CPU Interface Cable (5 ft.)
SDI Paddle Board to I/O Cable (18 in.)
Network to Controller Cable (8 ft.)
CPU to Network Cable (2 ft.)
CP-to-CP Cable (6 ft.)
IOP to IOP SCSI Cable (6 ft.)
Module Side Cover (Note 3)
Peripheral Signaling card (PS)
Power Monitor
Three-Port Extender card (3PE)
Clock Controller