12-134
Upgrades to Meridian 1 option 81
Table 12-29
Group 3 and Group 4 intercabinet cables
Cable
NTND28BC
NTND28BC
NTND28BC
NTND28BC
NTND28BC
NTND28BC
NTND28BC
NTND28BC
553-3001-250 Standard 14.00 August 1996
46 For Group 3 and Group 4 (if equipped), connect the intercabinet cables
from the NTND33CC kit:
•
Mount and screw-lock the intercabinet cables listed in Table 12-29
to the connector housing on the top of the QCA108 cabinet (see
Figure 12-30).
•
Route the cables along the overhead cable racks to the Core
Modules. Connect the cables to the outside of the right I/O panels as
listed in Table 12-29, and secure the cables with the
screw-locks.
Cable label
CPU0-CNI-10A to 3PE-GRP3/0-J3
CPU0-CNI-10C to 3PE-GRP3/0-J4
CPU0-CNI-10D to 3PE-GRP4/0-J3
CPU0-CNI-10F to 3PE-GRP4/0-J4
CPU1-CNI-10A to 3PE-GRP3/1-J3
CPU1-CNI-10C to 3PE-GRP3/1-J4
CPU1-CNI-10D to 3PE-GRP4/1-J3
CPU1-CNI-10F to 3PE-GRP4/1-J4
Connector
I/O panel
housing
connector
position
H2
Core 0—J6
H4
Core 0—J5
H6
Core 0—J10
H8
Core 0—J9
H10
Core 1—J6
H12
Core 1—J5
H14
Core 1—J10
H16
Core 1—J9