Honda Acura NSX 1991 Service Manual page 71

Engine Removal/Installation
60. Attach a chain hoist to the engine. Remove the
front and rear mounting bolts, then separate the
engine from the suspension and the beam
assembly.
CAUTION: Do not hit the engine oil cooler on the
rear right beam bracket.
61. Install the engine in the reverse order of removal:
NOTE:
body with screwdriver (page 5-27).
l Temporarily torque the two front beam nuts and
front engine mounting bolt when installing the
A/C compressor.
5 - 2 8
assembly, then torque the four mounting bolts.
driveshaft clicks into place.
CAUTION: Use new set ring on installation.