Honda Acura NSX 1991 Service Manual page 105

24. Remove the side engine mount, then push it into the
side mounting bracket housing of the body (page
25. Remove the transmission mount.
26. Remove the alternator bracket stiffener (page 6-24).
27. Disconnect the knock sensor connectors, then re-
move the wire holder.
28. Remove the heater hose and the water hoses.
6x 1.0 mm
KNOCK SENSOR
WIRE HOLDER
WATER HOSES
29. Remove the water passage.
mm
30. Remove the cylinder head covers.
31. Turn the crankshaft so that the No. 1 piston is at top-
dead-center (page 6-25, 26),,
32. Install the attachment under the engine, then tilt the
engine approximately 5O using a jack (page 6-24)
33. Remove the alternator bracket.
PIPE
9x
ALTERNATOR
6-31